Did you know that by choosing the right abrasive, you can reduce the time needed to complete the job in some cases by up to 80%?
It simply makes a difference whether you are blasting with sharp or rounded edges, glass, ceramics or plastic, etc. Each situation requires a different abrasive and by choosing the right one, you will achieve high efficiency.
In this video, one of our customers is using our abrasives in their work. It’s a great way to showcase the quality and effectiveness of our products in action. We believe it would be a great addition to our website as it reinforces trust in what we offer.
Glass microspheres are a precision blasting medium for damage-free cleaning, tolerance maintenance and are also suitable for deburring and satin finishing of metal parts made of aluminum, brass or stainless steel. Their chemical inertness (insoluble in water or oil) ensures that the parts being treated will not be contaminated. The high-quality, durable soda-lime glass microspheres (free of free silica) are made from recycled glass in France.
Impact treatment, Microblasting, Cleaning of rubber molds, glass products, Deburring, Satin finishing of stainless steel and light alloys, Appearance of stainless steel and light alloys, Post-processing of 3D prints from additive manufacturing SLS or MJF
*Note: pressure should not exceed 4 bar to avoid breaking the beads and creating square glass.
Angle grinding glass is made from recycled soda-lime silicate glass, which is crushed and sieved to obtain angular particles. The particles have sharp edges, making them effective for polishing and cleaning. Glass powder is a chemically inert product that does not contain iron. It is made from recycled glass, which helps reduce waste.
Sandblasting and cleaning of metal surfaces, surface preparation before painting or removing rust and dirt. Smooth polishing of various metal and concrete surfaces. Stone finishing, grinding and polishing of precious stones and building materials. Can be used both in cabinets and with a free jet sander.
Ceramic microspheres are one of the best choices when it comes to shot blasting. They offer higher strength than glass microspheres and, due to their lightness, require a reasonable projection power. They are made of very durable zirconium oxide and are iron-free, allowing the processing of stainless steel and aluminum. Ceramic microspheres are a guarantee of durability and efficiency
Impact machining, lapping, surface cleaning, satin finishing, polishing, shot peening, chemical grinding, deburring and additive/3D manufacturing SLS or MJF
A mineral, angular and very resistant abrasive, perfectly suited for stripping metal parts. This very hard aluminium oxide can be sprayed a large number of times and is widely recommended in the bag blasting cabinet. Brown corundum is produced by fusing bauxite and high purity aluminium oxide in an electric arc furnace at temperatures above 2000°C. Its high titanium dioxide (TiO2) content gives it great strength and allows it to be excellently recycled. Brown corundum is an aluminium oxide that offers complete chemical neutrality. Its low density allows the processing of fine sheet metal without deforming it, as it can be sprayed at low pressure.
Blasting in the cabin, preparation before painting, paint stripping, cleaning rust, scale, corrosion, old paint, glass engraving, removing burrs, satin finishing, creating unevenness.
White corundum is a high-purity alumina. It is much harder than brown corundum, free of impurities and suitable for applications that do not tolerate the presence of iron oxide because it is non-ferrous. White corundum is produced by melting bauxite and high-purity alumina in an electric arc furnace at temperatures exceeding 2,000°C.
Sandblasting of non-ferrous materials, preparation before painting, paint removal, cleaning of rust, scale, corrosion, old paint, glass engraving, deburring, satin finishing, roughening, polishing/matting, glass and resin bonded grinding wheels.
The plastic guarantees perfect cleaning without damaging the original surface thanks to its high-pressure projection and flexibility. It is a so-called scrubbing abrasive. This medium is intended for use ideally in a pressure bag cabin and for multiple spraying. This abrasive is a thermosetting urea amino polymer. Type II is the most widely used and versatile medium for surface treatment. Its hardness is average in the panel of thermoformed plastic media. It can be used for surface treatment in both dry and wet environments.
Removal: Painting hulls or other parts made of aluminum, titanium, magnesium or composite materials, bodywork without the need to cover chrome and glass. Cleaning without removing material: Molds, extruder screws, tools, parts, removing carbon deposits, printed circuit boards/components. Scrubbing: Markings/lettering on various materials such as plastic/glass.
The plastic guarantees perfect cleaning without damaging the original surface thanks to its high-pressure projection and flexibility. It is a so-called “scrubbing” abrasive. This medium is intended for use ideally in a pressure bag cabin and for multiple spraying. Type III is a thermosetting melamine aminopolymer. Melamine is the most aggressive and hardest of the thermoformed plastic media (6 times more aggressive than urea – type II). It must also be chosen carefully to avoid damaging delicate materials. It can be used for surface treatment in both dry and humid environments.
Removal: Painting hulls or other parts made of aluminum, titanium, magnesium or composite materials, bodywork without the need to cover chrome and glass. Cleaning without removing material: Molds, extruder screws, tools, parts, removing carbon deposits, printed circuit boards/components. Scrubbing: Markings/lettering on various materials such as plastic/glass.
Scorex® is a blasting abrasive made from blast furnace slag, also known as calcium silicate. It is intended for cleaning steel and stone/concrete surfaces by spraying and for removing rolling ladders, rust, old paint, dirt, etc. It is suitable for SA-3, SA-21/2 and SA-2 levels, as well as SA-1, also known as sweeping cleaning. It is very suitable for cleaning stone and concrete (facade cleaning) and also for sanding wood in fine grit because it does not contain iron particles. Scorex® is precisely processed and calibrated and fully complies with ISO 11126-6 and 11127. It contains less than 1% free crystalline silica.
Stripping and surface preparation of all types of materials including steel, stone, brick or wood.
Use in mobile sandblasters
Iron silicate is produced during the smelting of ore concentrates. This is passed through a groove and granulated at a temperature of approximately 1250 °C using a pressurized water jet with a controlled temperature. After cooling in a fresh water tank, the fine particles are separated from the granulate produced in this way. Iron silicate is produced in accordance with DIN EN ISO 11126-3. It is a glassy amorphous slag that does not absorb water. No crushing or grinding processes are involved in the production of the abrasive. As a result, the individual abrasive particles do not break and retain their extreme hardness and toughness, which applies to all particle sizes. Suitable for SA-3, SA-2½, SA-2 and SA-1. Contains less than 1% free crystalline silica, so it is approved for dry blasting.
Cleaning and degreasing of metal and stone/concrete, removal of chips, rust, old paint and dirt. Use in mobile sandblasters, airbrushing machines.
The technology for producing high-carbon steel shot is the most advanced in the world. Our German manufacturer offers shot that meets international SAE standards. The result is a high-quality martensitic angle shot. Continuous quality control combined with cutting-edge manufacturing processes optimizes shot life and cleaning efficiency.
Blasting in turbines, blasting in glove boxes with compressed air, sand removal, scale removal, deburring, surface preparation, prestressed blasting, granite cutting. Field of activity: Foundry and forging, metallurgy, transport, energy, construction, manufacturing.
The technology for producing high-carbon steel shot is the most advanced in the world. Our German manufacturer offers shot that meets international SAE standards. The result is a high-quality martensitic angle shot. Continuous quality control combined with cutting-edge manufacturing processes optimizes shot life and cleaning efficiency.
Surface hardening, shot peening, rust removal, grain removal, deburring, rust removal, surface treatment. Field of application: metallurgy, aviation, food industry, chemistry and medicine.
Stainless steel shot is obtained by melting, crushing and screening Cr stainless steel. The high chromium content ensures excellent resistance to corrosion and use. It is an abrasive that offers great durability and recyclability due to its high resistance. It is recommended for cleaning surfaces, removing paint and coatings and creating surface roughness for treatments that must be free of ferrous impurities. Ideal for treating stainless steel, galvanized steel and aluminum.
Surface preparation, intensive cleaning, final appearance treatment of aluminum and zinc die castings, aluminum profiles, natural stone and concrete profiles, aluminum, brass and stainless steel forgings Industry: Automotive, aerospace, marine, chemical and food industries
Stainless steel round shot is produced by atomizing Cr Ni stainless steel. After the various stages of obtaining round pellets, precise sieving is carried out. Its austenitic microstructure offers great durability, making it ideal for surface preparation and finishing work. Its stainless properties make this product the ideal choice where ferrous metal contamination needs to be avoided. Suitable for free jet and turbine blasting. It allows for better corrosion resistance and clean, shiny surfaces. The chemical composition of this round shot corresponds to austenitic stainless steel, a grade of stainless steel commonly used for its corrosion resistance and good formability.
Surface hardening, shot peening, rust removal, grain removal, deburring, rust removal, surface treatment. Field of application: aviation, food industry, chemistry and medicine.
This company is a major company with a 40-year history and is among the leaders in its segment.
From basic cabins for occasional operations, through industrial machines requiring efficiency and sustainability, to custom design and production of very complex machines according to specifications.
ARENA offers the widest range of impact surface treatment cabins on the market with many standard or special options.
Compactness, robustness as well as ease of use and maintenance make our cabins an indispensable tool for all types of industries and all impact surface treatment needs.
We will be happy to answer all your questions and help you find a suitable solution.
